Definitions and units
For cyclical processes, such as rotation, oscillations, or waves, frequency is defined as a number of cycles per unit time. In physics and engineering disciplines, such as optics, acoustics, and radio, frequency is usually denoted by a Latin letter f or by a Greek letter ν (nu).
In SI units, the unit of frequency is hertz (Hz), named after the German physicist Heinrich Hertz. 1 Hz means that an event repeats once per second. A previous name for this unit was cycles per second.
A traditional unit of measure used with rotating mechanical devices is revolutions per minute, abbreviated RPM. 60 RPM equals one hertz.[3]
The period, usually denoted by T, is the length of time taken by one cycle, and is the reciprocal of the frequency f:
The SI unit for period is the second.
[edit] Measurement
[edit] By counting
Calculating the frequency of a particular event is accomplished by counting the number of times that event occurs within a specific time interval, then dividing the count by the length of the time interval. For example, if 71 events occur within 15 seconds, the frequency is:
If the number of counts is not very large, it is more accurate to measure the time interval for a predetermined number of occurrences, rather than the number of occurrences within a specified time.[4] The latter method introduces a random error into the count of between zero and one count, so on average half a count. This is called gating error and causes an average error in the calculated frequency of Δf = 1/(2 Tm), or a fractional error of Δf / f = 1/(2 f Tm) where Tm is the timing interval and f is the measured frequency. This error decreases with frequency, so it is a problem at low frequencies where the number of counts N is small.
[edit] By stroboscope
An older method of measuring the frequency of rotating or vibrating objects is to use a stroboscope. This is an intense repetitively flashing light (strobe light) whose frequency can be adjusted with a calibrated timing circuit. The strobe light is pointed at the rotating object and the frequency adjusted up and down. When the frequency of the strobe equals the frequency of the rotating or vibrating object, the object completes one cycle of oscillation and returns to its original position between the flashes of light, so when illuminated by the strobe the object appears stationary. Then the frequency can be read from the calibrated readout on the stroboscope. A downside of this method is that an object rotating at a multiple of the strobing frequency will also appear stationary.
[edit] By frequency counter
Higher frequencies are usually measured with a frequency counter. This is an electronic instrument which measures the frequency of an applied repetitive electronic signal and displays the result in hertz on a digital display. It uses digital logic to count the number of cycles during a time interval established by a precision quartz time base. Cyclic processes that are not electrical in nature, such as the rotation rate of a shaft, mechanical vibrations, or sound waves, can be converted to a repetitive electronic signal by transducers and the signal applied to a frequency counter. Frequency counters can currently cover the range up to about 100 GHz. This represents the limit of direct counting methods; frequencies above this must be measured by indirect methods.
[edit] Heterodyne methods
Above the range of frequency counters, frequencies of electromagnetic signals are often measured indirectly by means of heterodyning (frequency conversion). A reference signal of a known frequency near the unknown frequency is mixed with the unknown frequency in a nonlinear mixing device such as a diode. This creates a heterodyne or "beat" signal at the difference between the two frequencies, which is low enough to be measured by a frequency counter. Of course, this process just measures the unknown frequency by its offset from the reference frequency, which must be determined by some other method. To reach higher frequencies, several stages of heterodyning can be used. Current research is extending this method to infrared and light frequencies (optical heterodyne detection).
[edit] Frequency of waves
Frequency has an inverse relationship to the concept of wavelength, simply, frequency is inversely proportional to wavelength λ (lambda). The frequency f is equal to the phase velocity v of the wave divided by the wavelength λ of the wave:
In the special case of electromagnetic waves moving through a vacuum, then v = c , where c is the speed of light in a vacuum, and this expression becomes:
When waves from a monochromatic source travel from one medium to another, their frequency remains exactly the same — only their wavelength and speed change.
[edit] Examples
[edit] Physics of light
Radiant energy is energy which is propagated in the form of electromagnetic waves. Most people think of natural sunlight or electrical light, when considering this form of energy. The type of light which we perceive through our optical sensors (eyes) is classified as white light, and is composed of a range of colors (red, orange, yellow, green, blue, indigo, violet) over a range of wavelengths, or frequencies.
Visible (white) light is only a small fraction of the entire spectrum of electromagnetic radiation. At the short end of that wavelength scale is ultraviolet (UV) light from the sun, which cannot be seen. At the longer end of that spectrum is infrared (IR) light (perceived as heat), which is used for night vision and other heat-seeking devices. At even shorter wavelengths than UV are X-rays and Gamma-rays. At longer wavelengths than IR are microwaves, radio waves, electromagnetic waves in megahertz and kHz range, as well as natural waves with frequencies in the millihertz and microhertz range. A 2 millihertz wave has a wavelength approximately equal to the distance from the earth to the sun. A microhertz wave would extend 0.0317 light years. A nanohertz wave would extend 31.6881 light years.
Electromagnetic radiation is classified according to the frequency (or wavelength) of the light wave. This includes (in order of increasing frequency): natural electromagnetic waves, radio waves, microwaves, terahertz radiation, infrared (IR) radiation, visible light, ultraviolet (UV) radiation, X-rays and gamma rays. Of these, natural electromagnetic waves have the longest wavelengths and gamma rays have the shortest. A small window of frequencies, called the visible spectrum or light, is sensed by the eye of various organisms, with variations of the limits of this narrow spectrum.
[edit] Physics of sound
Sound is vibration transmitted through a solid, liquid, or gas; particularly, sound means those vibrations composed of frequencies capable of being detected by ears. For humans, hearing is limited to frequencies between about 20 Hz and 20,000 Hz (20 kHz), with the upper limit generally decreasing with age. Other species have a different range of hearing. For example, some dog breeds can perceive vibrations up to 60,000 Hz.[5] As a signal perceived by one of the major senses, sound is used by many species for detecting danger, navigation, predation, and communication.
The mechanical vibrations that can be interpreted as sound are able to travel through all forms of matter: gases, liquids, solids, and plasmas. The matter that supports the sound is called the medium. Sound cannot travel through vacuum
No comments:
Post a Comment